CartVisualCreate account

Why Can Esko Show My Bottle Shape but Not Attach Its Label Artwork?

A visible 3D shape is not necessarily a defined printable surface. Esko’s structural-design workflow checks for a Printable Part; an external Collada shape may need that part added before artwork can be assigned.

Published · By CartVisual editorial team

Separate the visible object from its printable region

A supplier sends a bottle model that rotates correctly, but the designer cannot place the approved label as expected. The working assumption is that the image is the wrong size. First inspect the structural asset: the ability to display a shape does not establish that the application has a defined label surface for the graphics.

Esko Studio Essentials 26.03 describes Printable Parts as extensions in Collada structural designs. A scene can contain printable and non-printable parts. It specifically notes that an external modeling application’s Collada file may need a printable part added, for example by adding a label in Studio Toolkit. This describes the structural handoff, not a guarantee that every imported model can accept arbitrary artwork immediately.

Ask for the missing handoff object

Available assetWhat it can establishWhat to request
Visible bottle meshSome3D shape is presentThe intended printable label region
Front and back label artworkApproved graphic candidatesThe corresponding structural surface assignment
Structural design with defined label partsA candidate mapping routeActual placement and artwork revision review
Finished render onlyOne flattened appearanceEditable structural and graphic inputs if further production is required

Work through a fictional refill bottle

Suppose BOTTLE-R5 contains a glass shape and two separate approved label files. The team must establish which region receives the front and which receives the back. Ask the responsible structural designer whether the imported file includes those printable parts. If absent, have an appropriate Esko production workflow define them from the real label specification rather than asking an image generator to paint a plausible label onto a screenshot.

Keep the physical label dimensions and bottle specification with the request. A convenient region drawn on a model is not proof that a real label will fit the curvature or that the supplier can manufacture it. Review orientation, seam, wrap and graphic revision in the resulting representation. No3D import, label addition or print proof was performed for this example.

Do not confuse structure and graphic content

The same Esko guide distinguishes structural data from the graphics aligned to it. A structural file does not by itself supply the approved brand artwork. Preserve both sources and their revision relationship. If the model shows an old label, identify whether the wrong graphic was assigned before replacing the geometry.

The flat-artwork versus3D-preview guide separates artwork from presentation. The supplier handoff guide identifies the broader brief. This task adds the application's specific printable-part requirement between those assets.

Close the structural mapping review

Record the structural file, named printable parts, assigned graphics and reviewed output together. Hold if the apparent front/back placement is only baked into a render or cannot be reproduced from the identified source files. CartVisual concepts can communicate appearance, but they do not add Esko structural parts or issue supplier-approved label specifications.

Sources

Scope and evidence

Prepared by CartVisual with AI assistance and checked against the listed sources. Illustrative editorial workflow, not an executed account operation, generation, software edit, print or customer test. External tool capabilities are not CartVisual integrations or certifications. Verify actual source, destination and account requirements.

Related decisions

Explore the packaging mockup generator workflow