CartVisual
Sign inCreate account

Product videos / MERCHANT WORKFLOW

Can You Mark the Exact Product-Video Frame to Correct in Runway Seedance?

Yes. Runway documents a Sketch workflow in Seedance 2.5 Edit and Extend modes. You can scrub to a source-video frame, draw on it, and select Export Sketch. Runway then attaches the sketch to the prompt as a timestamped image reference. This anchors the instruction to a particular moment; it does not guarantee that the model will modify only that frame or preserve every unrelated product detail.

01 / CAN YOU MARK THE EXACT PRODUCT-VIDEO FRAME TO CORRECT IN RUNWAY SEEDANCE?

Use a visual anchor when words alone are ambiguous

A merchant may report that a product cap becomes too wide near the end of a video. A general instruction such as fix the cap does not identify which moment or which visible boundary needs attention.

Runway's Seedance 2.5 documentation provides a more specific route. In Edit or Extend, select Sketch on the source video, scrub to the intended frame, draw the correction, and choose Export Sketch.

The resulting annotation is inserted into the prompt as an image reference associated with a time position, using a format such as @Image 1 at ss:SS. Runway says sketches work best in Edit mode.

The annotation identifies the relevant visual region and moment. It is not a pixel-level mask, a guaranteed object lock, or a command that forces every other frame to remain unchanged.

Choose this route when the correction is spatially specific and difficult to describe precisely. If the entire clip depicts the wrong product edition, a local sketch is unlikely to resolve the broader source problem.

02 / CAN YOU MARK THE EXACT PRODUCT-VIDEO FRAME TO CORRECT IN RUNWAY SEEDANCE?

Prepare a bounded edit instead of an unrestricted redesign

First retain the original source video and the authoritative product photograph. Review the source in a player and record the actual timestamp where the defect is visible. The timestamp should come from the real clip, not from an assumed frame rate or a remembered playback position.

Open the applicable Seedance mode and select Sketch. Move the playhead to the affected frame. Draw only the correction needed to explain the intended region, then export the sketch into the prompt.

Write a concise instruction identifying the required change and the product features that must remain consistent. For example, the cap should match the approved reference's narrow profile while the bottle body, label, and camera framing remain consistent.

Runway documents that Edit matches the source video's duration and aspect ratio. Record those properties before submission. A sketch does not provide an independent Edit duration setting.

The defect-report guide

03 / CAN YOU MARK THE EXACT PRODUCT-VIDEO FRAME TO CORRECT IN RUNWAY SEEDANCE?

Hypothetical cap correction at one source moment

Hypothetical exercise; no Runway sketch or generation was performed. Fictional SKU TONER-BLUE-120 has a source clip toner-blue-ad-v2.mp4, ten seconds long, and approved product photograph toner-blue-front-r3.png.

The editorial defect record stipulates a widened cap near 00:07. That timestamp is invented for this exercise; a real editor must inspect the actual clip and determine the precise affected frame.

The proposed sketch is CAP-ANNOTATION-01. It outlines the correct cap width on the selected frame. The intended prompt reference would be associated with that time position, while the instruction protects the bottle silhouette, label wording, background, and camera movement.

RecordSpecified stateAcceptance question
Source videotoner-blue-ad-v2.mp4Which frame first shows the defect?
Reference imagetoner-blue-front-r3.pngWhat is the correct cap geometry?
SketchCAP-ANNOTATION-01 at proposed 00:07Is the marked region unambiguous?
Edited candidateNot generatedDid cap geometry improve without new defects?
04 / CAN YOU MARK THE EXACT PRODUCT-VIDEO FRAME TO CORRECT IN RUNWAY SEEDANCE?

Branch on what changed in the returned video

If the cap remains too wide at the marked moment, hold the result. Verify that the sketch was attached to the intended frame and that the approved cap reference is clear. A second request should change a justified input or instruction, not simply repeat an unexamined failure.

If the cap looks correct at 00:07 but the label changes at 00:08, reject the whole candidate for the intended product role. The original defect may be addressed while an unrelated merchandise invariant has failed.

If the sketch points to the wrong moment, correct the source timestamp and annotation. Do not classify that as evidence of model editing accuracy or inaccuracy until the input reference is correctly identified.

If the proposed correction actually requires replacing an entire scene or adding footage, reconsider the mode. The Edit-versus-Extend guide

Inspect the complete returned video at normal speed and at relevant frames. Keep the original, sketch, prompt, and edited candidate as separate records. CartVisual does not provide Seedance's timestamped sketch control.

05 / CAN YOU MARK THE EXACT PRODUCT-VIDEO FRAME TO CORRECT IN RUNWAY SEEDANCE?

Use the example with your own product records

The filled records are hypothetical editorial examples. The entry-template row is for your own files, settings and observations; it does not connect to another application.

Correction IDSKUSource videoProposed timeApproved referenceSketch regionProtected elementsActual resultNext action
CAP-ANNOTATION-01TONER-BLUE-120toner-blue-ad-v2.mp400:07 hypotheticaltoner-blue-front-r3.pngCap widthBottle silhouette, label, cameraNot generatedLocate actual frame and attach sketch
CAP-ANNOTATION-01-REVIEWTONER-BLUE-120Proposed edited candidate00:07–00:08 hypotheticaltoner-blue-front-r3.pngCap and adjacent labelAll unrelated product detailsNot inspectedCompare complete clip after any generation

Download the editable CSV worksheet

06 / CAN YOU MARK THE EXACT PRODUCT-VIDEO FRAME TO CORRECT IN RUNWAY SEEDANCE?

What the sources establish

Published by CartVisualPublished Updated Evidence and editorial policy
SOURCES & SCOPE

Sources and further reading

Recorded source-review dates are listed individually below. An undated source does not inherit the article’s publication date. Software and platform rules can change; check the current original before acting.

QUESTIONS, ANSWERED

Frequently asked questions

Does a timestamped sketch guarantee that only one frame changes?

No. It supplies a time-specific visual reference. The generated video still requires full-clip review.

Can I use a sketch in Extend mode?

Runway documents Sketch in Edit and Extend, while noting that sketches work best in Edit mode.

YOUR NEXT CAMPAIGN

Create assets from a clear source

Bring your reviewed source photo or brand brief to CartVisual. Check the current tools, account access and credits before generating, then compare every result with your source.

Create a CartVisual account Open the workspace Check access and credits