Which measurement should copy use for a product with several adjustment positions?

Give each position a stable identifier

Ask the merchant which configurations are actually supported and how they are selected. Name or number those positions without inventing new modes. Record whether a figure is a fixed position, a documented adjustment range, or an approximate reference; these statements require different evidence.

Keep the SKU and assembly version attached to the record. An extended accessory or optional part can change the dimensions. Do not borrow the maximum measurement from a different configuration and print it next to a compact product image without explaining the state.

Match measurement points before comparing numbers

Record what is measured: overall height, a platform height, reach from a hinge, or usable clearance. Two figures can differ because their endpoints differ, not because a product is adjustable. Use the merchant’s dimensioned source or an authorized measured record, not visual proportions in an AI scene.

Prepare a state-to-number table and a matching illustration for each advertised value. If only one verified position exists, use that position and hold range claims. A model can suggest a plausible geometry but cannot confirm actual adjustment stops, locking behavior, or load performance.

1. Confirm supported positions and exact SKU.
2. Record measurement endpoints for each dimension.
3. Attach the documented value to its position.
4. Compare the illustration with that same state.
5. Hold unsupported ranges or configuration-wide claims.

A fictional adjustable stand

Fictional exercise: an adjustable stand has documented low and high positions, but a campaign places the high-position height beside a picture of the low state. The review identifies the state mismatch before questioning the number itself. The product and measurements are hypothetical; no stand was measured or operated.

The seller either changes the picture to the documented high state or labels both states clearly. If the source has no verified intermediate range, the draft does not invent one. Stop when a generated hinge position does not correspond to a supported configuration; a believable pose is not an engineering fact.

Pair state values with their exact endpoints

Fictional dimension exercise: a stand has only two documented positions. In low state A, overall height is 180 mm and clearance below the platform is 140 mm. In high state B, those values are 240 mm and 200 mm. These invented values illustrate state and endpoint identity; no stand was measured and no load performance is claimed.

Two documented endpoint positions do not prove continuous adjustment between them. Nor can overall height replace clearance. Keep the same SKU, assembly/accessories, measurement endpoints and source revision with each row. If the image changes to another state, renew the associated dimension check rather than reusing the largest approved figure.

Review measurements whenever the configuration changes

Retain the state identifiers, source endpoints, values, and approved views together. When a designer changes the pose or assembles a different accessory, recheck the associated figures. Otherwise a valid measurement can become misleading solely because the image no longer shows the state it describes.

CartVisual can help organize those facts and create illustrative product visuals, but it does not measure or test adjustment mechanisms. Obtain appropriate supplier records and specialist confirmation for operational or performance questions. Stop the dimension claim when the state or endpoints are unclear rather than choosing the largest number for stronger marketing.

Position and measurement record

Use this matrix as a manual review record and add your own real evidence. Its conditions are not completed test results.

Download this question’s review worksheet (CSV)